Complett QF System

The QF System (as Quick Finish system), is a new patent Complett that integrates in a binder different combinations of automatic finishing after the routing operation (such as for example the blocking of start and / or end of the cut, separation with cutting of the various pieces or cutting the length of the chain to different measures), operations that would normally be carried out manually. Through electronic controls this new machine offers the possibility of saving manual operations, standardizing the quality of the chosen finish and improving the quality of the cut-out itself with the help of programmable electronic tension that allows for example to have different tensions even in seam

• Automatic cutting
• Programmable electronic voltage
• Automatic closing of the last chain stitch
• Choice of work cycles (manual, semi-automatic, automatic)
• Hook needle from outside the crown as a 99-VD model
• Chain with a "101" thread
• Crown large diameter: 460mm.
• 360 ° rotating head.
• Clockwise or anticlockwise rotation (on request).
• LED lamp (on request)
• Low consumption engine.

Program List

• PROGRAM 1 - FINISH "A"
  Program for totally manual functionality as a traditional drier. The MANUAL FINISHING MODE is then implemented A. Possibility of using the electronic tension to differentiate the tension of the empty chain with respect to the chain of the seam
• PROGRAM 2 - FINISH "C"
  Program for semiautomatic functionality with the possibility of automatic cutting or determination of the output wire length, with manual cutting. FINITURA C of the QF SYSTEM FINISHING MODE will be obtained. The node will be closed by the QF SYSTEM by means of the electronic voltage.
• PROGRAM 3 - FINISH "B"
  Program for automatic functionality with insert of a piece of fabric (dowel) to have a finishing mode such as FINISH B of the MANUAL FINISHING MODE with the advantage of not having to disassemble the empty chain. The anchor will be removed with a simple manual cutting operation. The closure of the node is carried out by the QF SYSTEM device by means of the electronic voltage before the automatic cut.
• PROGRAM 4 - FINISH "C"
  Program for automatic functionality. FINITURA C of the QF SYSTEM FINISHING MODE will be obtained. The closure of the node is carried out by the QF SYSTEM by means of the electronic voltage before the automatic cut.