HoopMaster Mighty Hoop® 8” x 13" Frame

To be used with your HoopMaster System. The Adjustable Fixture is required with this frame

Clamp over zips, velcro, buttons and more with strong magents.

8" x 13" / 203mm x 330mm

Brother PR Series embroidery users please note that due to the maximum embroidery areas, the maximum sewing area when using this frame is limited to 7.25" x 11.5" (184mm x 292mm) on all 6 needle models, and 7.25" x 11.75" (184mm x 298mm) on all 10 needle models. The full width of this frame (330mm) will not be able to be used, however the frame will still fit on the machine.

We recommend using this frame along side the Brother Wide Table, or Brother Tubular Frame Table when using this frame on Brother PR Series embroidery machines. This is due to the weight of the frame that strains the Brother machines.

When using this frame on a ZSK SPRINT machine, you must use the Tubular System Extender (part number 360.008.915)

This machine will only fit on multi-head machines part of the ZSK RACER W and WL series (with 495mm head distance). It will not be compatible with any ZSK RACER S or SL series machines (with only 400mm head distance)

Mighty Hoops contain very strong magnets, if you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand the warnings posted at this link. Magnet Warnings